Yamaha RCX40, User Manual

Page: 240 / 388

4-
180
Operation
4
12. “SYSTEM” mode
2. Data bits
This parameter sets the data bit length.
[Procedure]
1) Select “2. Data bits” in “SYSTEM>CMU” mode.
2) Press the
F 1
(EDIT) key.
The function key menu changes.
Fig. 4-12-50 Setting the “Data bits”
SYSTEM >CMU V8.01
1.CMU mode ONLINE
2.Data bits 8
3.Baud rate 9600
4.Stop bit 1
5.Parity ODD
7 8
3) Select the data bits with the
F 1
(7) or
F 2
(8) key.
4) Press the
ESC
key to quit the setting. To continue selecting other items, use the
cursor (
↑
/
↓
) keys.
3. Baud rate
This parameter sets the communication speed.
[Procedure]
1) Select “3. Baud rate” in “SYSTEM>CMU” mode.
2) Press the
F 1
(EDIT) key.
The function key menu changes.
Fig. 4-12-51 Setting the “Baud rate”
SYSTEM >CMU V8.01
1.CMU mode ONLINE
2.Data bits 8
3.Baud rate 9600
4.Stop bit 1
5.Parity ODD
4800 9600 19200 38400 57600
3) Select the baud rate with the
F 1
(4800) through
F 5
(57600) keys.
4) Press the
ESC
key to quit the setting. To continue selecting other items, use the
cursor (
↑
/
↓
) keys.
n
NOTE
Katakana letters (Japanese phonetic)
cannot be sent if data bit length was
set to 7 bits.
n
NOTE
Communication errors are more
prone to occur at high
communication speeds. If
communication errors frequently
occur, set a low communication speed.