Scan to PC (FTP/SMB)
WorkCentre 7425/7428/7435
System Administrator Guide
125
15. Select
User Name
and provide the User account name assigned to the directory on the receiving
computer.
16. Select
Password
and provide the password to access the User account on the receiving computer.
17. Select
Port Number
to set the communications port number. Standard Port is recommended.
18. When done changing and saving settings, touch
Close
(repeatedly, if necessary) to exit to the
Tools
screen.
19. Wait several seconds for the Auto Clear service to log you out.
Using the Scan to PC (FTP/SMB) Feature
After the appropriate ports have been enabled, TCP/IP has been configured, and the receiving
computers address added to the Address Book, the Scan to PC (FTP/SMB) feature can be used as
follows.
1. Select
Scan to PC
from the Services screen.
2. Touch
Transfer Protocol
, select a protocol, and touch
Save
.
3. Note that you can touch the blank lines on the screen and manually enter Server settings, or touch
Address Book
. For SMB you can also browse the Microsoft Network.
4. Select the Receiving Computer (computer or server) in the list contained in the Address Book and
touch
Save
.
5. Place your document in the document feeder and press the control panel’s large, green
Start
button. Progress of the data transfer will be displayed on screen.
Summary of Contents for WORKCENTRE 7428
