Xerox WORKCENTRE 7428, System Administrator Manual, Page: 139 / 208

Installing and Using the Network Scanner Utility
WorkCentre 7425/7428/7435
System Administrator Guide
139
4. From the File menu, select the command to import the image from the scanner. In Photoshop, for
example, this would be Import/Twain.
5. If the scanner doesn't automatically display on screen allowing its selection with the
Select
Scanner button, perform the next six steps. Otherwise go to step 12 below.
6. Click Refresh .
7. Click Options .
8. Click Change Display in the scanner selection box.
9. To display scanners on other sub-networks, register them under Scanner Registration.
10. Click
OK .
11. Select the scanner for connection from the displayed list, then click Select Scanner . You can also
double click the displayed scanner's name.
12. Enter the folder number and password when prompted.
13. Click
Open Folder
.
14. From the displayed document list, select the document you wish to import and click
Import
.
Importing Scanned Data from the Folder using Network Scanner Utility 3
1. On your Windows desktop, select
Start\Programs\FujiXerox\Network Scanner Utility\Network
Scanner Utility 3 .
2. Select the scanner for connection from the displayed list, then click Select Scanner .
3. If no items are shown in the list, click Refresh , then Options , then Change Display and register the
scanner’s IP address and name. Click
OK
when done.
4. Enter the folder number and password when prompted.
5. Click
Open Folder
.
6. From the displayed document list, select the document you wish to import and click
Import
.