CentreWare Internet Services
WorkCentre 7425/7428/7435
System Administrator Guide
33
Configure LPD
1. Open your Web browser and enter the IP address of the printer in the address field. Press
Enter
to
open CentreWare Internet Services.
2. Click the
Properties
tab.
3. Enter the system administrator User Name and Password (default
admin
,
1111
) if prompted.
4. Click the
Connectivity
folder, then the
Protocols
folder.
5. Select
LPD
in the directory tree.
6. The available selections include:
•
Port Number
: (Default value is
515
.) As this is the port for the TCP Spooler assigned by the
IANA (Internet Assigned Numbers Authority), the default value should not need to be
changed.
•
TBCP Filter
: (Displayed when PostScript is enabled).
•
Connection Time-Out
•
Maximum Number of Sessions
: Enter the maximum number of simultaneously connected
hosts for this interface.
7. Enter a
Time Out
value for jobs being sent to the printer through this port. This is the length of
time that the controller will wait for an end of job command before printing the current job.
8. Click the
Apply
to accept the changes, or
Undo
to return the settings to their previous values.
Note:
Changes to settings are not applied until you restart the printer. A Reboot Machine button is
available on the Status Tab of CentreWare Internet Services.
Configure SNMP
It is possible to remotely define and modify GET (Read Only), SET (Read/Write), and Trap SNMP
(Simple Network Management Protocol) community names for the printer. You can also enter the
System Administrator's Name here for packet identification purposes.
SNMP Community Name properties that can be configured
•
Community Name (Read Only)
: This is the password for SNMP GET requests from the SNMP
Manager to the Agent in the printer. Applications, such as Xerox Printer Map or CentreWare
Conductor, obtaining information from the printer by SNMP use this password.
•
Community Name (Read/Write)
: This is the password for SNMP SET requests from the SNMP
Manager to the Agent in the printer. Applications, such as Xerox Printer Map or CentreWare
Conductor, which set information on the printer by SNMP use this password.
•
Community Name (Trap Notification)
: This is the default password for SNMP TRAPS sent from
the printer to the Manager by SNMP.
Summary of Contents for WORKCENTRE 7428
