Xerox WORKCENTRE 7428, System Administrator Manual, Page: 34 / 208

Administrative Tools
WorkCentre 7425/7428/7435
System Administrator Guide 34
Configuring SNMP Community Names in CentreWare Internet Services
1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter to
open CentreWare Internet Services.
2. Click the
Properties
tab.
3. Enter the system administrator User Name and Password (default
admin
,
1111
) if prompted.
4. Click the
Connectivity
folder, then the
Protocols
folder.
5. Select
SNMP Configuration
in the directory tree, and check the
Enable
box for the version desired.
6. Enter a name for
Community Name (Read Only)
, also known as GET.
7. Enter a name for
Community Name (Read/Write)
, also known as SET.
Caution: Caution: If you change the GET and/or SET Community Names, you must also change the
names in all network applications that are communicating by SNMP with this printer.
8. Enter a name for Community Name (Trap Notification) . This is the default password for SNMP
TRAPS sent from the printer to the Manager by SNMP.
9. Optionally enter the System Administrator's name for packet identification purposes.
10. Select a trap and click
Edit
in the Trap Notification Settings section.
11. Select your transport method (IPX or UDP) and fill in the trap destination information for your
selected method.
12. Select the event(s) that you wish to report on by checking the applicable box(es).
13. Click
Apply to accept the changes, or the Undo button to return the settings to their previous
values.
Note: Changes to settings will not be applied until you restart the printer. A Reboot Machine button is
available on the Status Tab of CentreWare Internet Services.
Configuring IPP
1. Open your Web browser and enter the IP address of the printer in the address field. Press
Enter
to
open CentreWare Internet Services.
2. Click the Properties tab.
3. Enter the system administrator User Name and Password (default admin , 1111 ) if prompted.
4. Click the Connectivity folder, then the Protocols folder.
5. Select IPP in the directory tree.
6. The available selections include:
• Port Number Static Display : This is the port number assigned by IANA (Internet Assigned
Numbers Authority. The default value is
631
.
•
Additional Port Number
: You can enter port
80
(HTTP) here as a backup port.
•
TBCP Filter
: Displayed when PostScript is enabled.
•
Administrator Mode
: This is disabled by default.
•
DNS
•
Connection Time-out
7. Select the DNS check box. The DNS Server will be available to resolve Host Names to IP Addresses,
in support of printing with IPP.