Xerox WORKCENTRE 7428 System Administrator Manual Download Page 48 | Manualshive

Page: 48 / 208

Xerox WORKCENTRE 7428 System Administrator Manual Download Page 48

Network Management

WorkCentre 7425/7428/7435
System Administrator Guide

48

TCP/IP Dynamic Addressing

1. Open your Web browser and enter the IP address of the printer in the address field. Press

Enter

to

open CentreWare Internet Services.

2. Click the

Properties

tab.

3. Enter the system administrator User Name and Password (default

admin

,

1111

) if prompted.

4. Click the

Connectivity

folder, then the

Protocols

folder.

5. Click

TCP/IP

.

6. Review the available selections as displayed on your screen and explained in the TCP/IP

Configuration Selection List, below.

7. Accept the default Host Name, or type in your own unique Host Name for this printer.
8. Select

DHCP

or

BOOTP

as your method for obtaining an IP Address.

Caution:

Changing the IP address for the printer will affect LPR/LPD, FTP, SNMP, and Port 9100

printing. It will also interrupt the ability to communicate with the printer using
CentreWare Internet Services. When you change the printer's IP Address, make sure to print out a
Configuration Report so that you have a record of the TCP/IP addresses for use with computers that
need to communicate with the printer using TCP/IP.

Note:

When using DHCP, set a reasonably long Lease Time for the IP Address so that the printer can be

shut down and serviced, when required, without being continuously assigned a new IP Address.

Note:

Upon rebooting, when the system comes up, if it can’t locate a DHCP server on the network it will

use whatever IP address it was previously configured with.

9. Determine the method to use to supply the DNS Server IP Addresses (to resolve Host Names with

IP Addresses).

10. Determine whether or not Dynamic DNS should be enabled.
11. Click

Apply

when done.

TCP/IP Configuration Selection List

As displayed on your screen, the following selections are available for TCP/IP Configuration.

IP Mode

Select the IP Mode that applies to your network environment.

General

•

Host Name

: The default entry assures a name that is unique to this device on the network.

•

IP Address Resolution

: Use this drop down menu to select the method to use to assign IP

Addresses. Select STATIC, DHCP, RARP, BOOTP, or DHCP/Autonet.

«
...
46
47
48
49
50
...
»

Summary of Contents for WORKCENTRE 7428

















































































































































































































Reviews:

No comments