Security
WorkCentre 7425/7428/7435
System Administrator Guide
96
•
Medium
: The revocation status of certificates is checked, but if the certificate status cannot be
obtained due to a network issue, the certificate will be considered valid.
•
High
: The revocation status of certificates is checked. A certificate is only considered valid after
verifying that the certificate has not been revoked.
3. Next, under
Retrieval of Certificate Status
, select the option for
By OCSP
for Common Access
Card setup.
Note:
The By Retrieving CRL option checks the certificate status on the Printer after retrieving a CRL.
4. Next, under the URL for the
OCSP Responder With
option, this should be setup by the System
Administrator for the Common Access Card setup. There is also an option to use an URL that’s
available on a certificate.
5. Next, set the
OCSP Communication Timeout Value
option based on your network performance.
6. Under the
CRL
options, verify that the check mark box for
Auto Retrieval of CRL
is
unchecked
.
Note:
The CRL Retrieval Time-out is not required for Common Access Card setup.
7. Upon making your selections, select the
Apply
button to register your selections. This will initiate
the printer to reboot, allowing the settings to take effect.
Configuring E-mail Signing Feature
The following procedure will be performed at the printer.
1. Press the
Log In/Out
button on the control panel.
2. Enter the
System Administrator’s Login ID
and
Passcode
if prompted (default
admin
,
1111
), and
press
Enter
.
3. Press the
Machine Status
button.
4. Touch the
Tools
tab.
5. Select the option for
System Settings
.
6. Locate and select the option for
Connectivity & Network Set-up
.
7. On the right side of the display, scroll down the list and locate the option for
Security Settings
.
8. Select the option for
S/MIME Settings
.
•
For Option #6 Digital Signature – Outgoing Mail, select the option for
Always Add Signature
and press the
Save
button.
•
For Option #7 Signing Certificate – Outgoing Email, select the option for
SmartCard
Certificate
and press the
Save
button.
9. Press the
Log In/Out
button, and select the option for
Reboot
.
Summary of Contents for WORKCENTRE 7428
