Xerox WORKCENTRE 7428, System Administrator Manual, Page: 141 / 208

Xerox Extensible Interface Program
WorkCentre 7425/7428/7435
System Administrator Guide
141
6. To enable SSL:
a. Click the Properties tab.
b. Click the Security folder, then SSL/TLS Settings .
c. If prompted, enter the system administrator user name and password (default: admin , 1111 ).
d. In the SSL/TLS Settings area, on the HTTP – SSL / TLS Communication line, click Enabled .
e. Click Apply .
Note: If changes were made to the SSL settings you may need to reboot the system. When SSL is
enabled, you must enter https:// (before your printer’s IP address) in the address field of your browser
to access CentreWare Internet Services. Example: https://13.140.244.11.
7. To enable the ports:
a. Click the Properties tab.
b. Click the Connectivity folder, then Port Settings .
c. On the SNMP line, click Enabled .
d. On the SMB line, click Enabled .
e. On the FTP Client line, click Enabled .
f. On the SOAP line, click Enabled .
g. Click Apply .
8. To ensure that IPv4 is enabled by default:
a. Click the Properties tab.
b. Click the Connectivity folder, then the Protocols folder.
c. In the Protocols folder, click TCP/IP .
d. In the IP Mode area, on the IP Mode line, click or verify IPv4 .
e. If you clicked IPv4, click Apply .
EIP applications can now register to the printer. You may need to map buttons to Custom Services
at the printer in order to see the new applications.