Xerox WORKCENTRE 7428, System Administrator Manual, Page: 117 / 208

Network Scanning (Using Templates)
WorkCentre 7425/7428/7435
System Administrator Guide
117
d. If you are using HTTPS:
•
On the Host Name / IP Address & Port line, type either an IP Address or Host Name for the
server.
• In the
Port Number
box (unlabeled), type
443
.
• If you are using SSL, select the
Validate Repository SSL Certificate (trusted, not expired,
correct FQDN) check box.
e. For either HTTP or HTTPS, if you are using a proxy server:
•
Click View HTTP Proxy Server Settings .
• On the Proxy Server page, verify that the settings match those in your proxy server
environment. Make changes as needed, then click
Apply
.
f. On the
Document Path
line, type the HTTP address. Example: /Inetpub/wwwroot/scans/.
g. In the Login Credentials to Access the Destination area, click your choice of log in credentials to
be used.
h. Type the Login Name and Password for the printer.
i.
Type the password in the Retype Password box.
j. Click Apply .
8. If prompted. type the administrator User Name and Password and click OK. The default is admin
and
1111
.
9. To set up a remote template pool repository, see the next procedure, Setting up a Remote
Template Pool Repository.
Setting up a Remote Template Pool Repository (optional)
1. At your computer, open your Web browser and enter the IP address of the printer in the Address or
Location field. Press Enter .
2. Click the Properties tab.
3. Click the Services folder, then the Network Scanning file folder.
4. Click the Advanced folder, then click the Template Pool Setup .
5. On the Template Pool Setup page, in the Remote Template Repository area:
a. In the Protocol drop down box, click HTTP or HTTPS .
The Remote Template Repository area refreshes and displays more options.
b. If you are using HTTP:
•
On the Host Name / IP Address & Port line, type either an IP Address or Host Name for the
server.
• In the Port Number box (unlabeled), type
80
.
c. If you are using HTTPS:
•
On the
Host Name / IP Address & Port
line, type either an IP Address or Host Name for the
server.
• In the Port Number box (unlabeled), type 443 for the port number.
• If you are using SSL, click the Validate Repository SSL Certificate (trusted, not expired,
correct FQDN)
check box.