Xerox WORKCENTRE 7428, System Administrator Manual, Page: 189 / 208

Xerox Smart eSolutions
WorkCentre 7425/7428/7435
System Administrator Guide
189
Xerox Smart eSolutions
To enable the printer for Automated Meter Reading and Supplies Replenishment:
Enable communications with the Xerox Smart eSolutions Server
1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter to
open CentreWare Internet Services.
2. Click the
Properties
tab.
3. If prompted, enter the system administrator user name and password (default:
admin
,
1111
).
4. Click the
Services
folder, then theXerox Services Folder
5. Click
theXerox Communication Server
6. In the Communication Setup area, check the
Server Communication
check box
7. Set the transmission time for a time when the printer will most likely be turned on during the day
8. Click
Apply
.
Set up the Internet Proxy Server (optional)
1. Click the
Properties
tab.
2. Click the
Connectivity
folder, then the
Protocols
folder.
3. Click
Proxy Server
.
4. In the General area, select the
User Proxy Server
check box, click
Enabled
5. If you have selected
Same Proxy for all Protocols
for
Proxy Setup
, you must enter the Internet
Proxy address in the HTTP section.
6. If you have selected Different Proxy for Each Protocol , be sure to enter the Internet Proxy address
in the HTTPS section.
7. Click
Apply
.
Configure DNS
1. Click the
Properties
tab.
2. Click the
Connectivity
folder and select the
Protocols
folder then selectTCP/IP.
3. In the
DNS Configuration
section select
Obtain DNS Server Address Automatically
, or manually
enter the DNS Server address information (when using STATIC, BOOTP, or RARP IP address
resolution).
4. Click
Apply
.
5. You may be prompted to reboot the printer.
Validate that your Printer has been Registered for Smart eSolutions
1. Click the
Properties
tab.
2. Click the
Services
folder, then the
Xerox Services
folder.