Xerox Common Access Card
WorkCentre 7425/7428/7435
System Administrator Guide
95
Note:
After the Printer has returned online, the System Administrator can load the required Root
Certificate Authority certificates for the Domain Controllers and the OCSP Server.
8. At your computer, within the option for
Machine Digital Certificate Management
locate and
select the option for
Upload Signed Certificate
. This option should now be available to you based
on the machine reboot.
Uploading Signed Certificates
After selecting the
Upload Signed Certificate
option, the System Administrator will perform the
following procedures.
1. Upon selecting the
Upload Signed Certificate
button, the following window will display. The
System Administrator can browse to the directory location on the PC where the certificates will be
stored.
2. After the certificate has been saved to the PC, the System Administrator can manage certificates
that are loaded onto the Printer, as well as the functions they are to be used for.
Note:
In order to review all the certificates, select the option for Other to view the available
certificates.
3. Select the desired options and select the
Display the list
button.
4. When the certificates are listed, you can select one by checking the box and then select
Certificate
Details
to review.
5. The Certificate Details window will allow the System Administrator to Export this certificate, Delete,
or Use this certificate.
Checking Proxy Server details
If required by your network environment, ensure the Proxy Server details have been configured.
1. At your computer, select the
Properties
tab in CentreWare Internet Services.
2. From the displayed window, select the option for
Connectivity
.
3. Next, select the option for
Proxy Server
.
4. The Proxy Server option needs to be
Enabled
and the server address needs to be configured.
5. Select the option for
Apply
.
Certificate Revocation Retrieval Settings
The System Administrator can use the functionality found in the Certificate Revocation Retrieval
Settings option to configure the desired Online Certificate Status Protocol (OCSP) or Certificate
Revocation List (CRL).
1. Under the
Security
folder, select the option for
Certificate Revocation Retrieval Settings
.
2. Under the Level of Certificate Verification section, select the
Level of Certificate Verification
setting for the Common Access Card to
High
.
The following Level of Certificate Validation descriptions are listed below;
•
Low
: The revocation status of certificates is not checked.
Summary of Contents for WORKCENTRE 7428
