Xerox WORKCENTRE 7428, System Administrator Manual, Page: 93 / 208

Xerox Common Access Card
WorkCentre 7425/7428/7435
System Administrator Guide
93
10. Select the Change Settings option and enter the IP address of the server in which the network
time will be synched with.
11. Press the
Save
button.
12. Press the
Log In/Out
button.
13. Touch
Logout
. The printer will automatically reboot.
Configure Authentication settings for CAC
Note: These installation steps can also be performed at the printer. This is be done by logging in as the
System Administrator, selecting the Machine Status button, then proceeding to the Tools tab and
navigating to the
Authentication/Security Settings
button. From the Authentication/Security
Settings button, continue to navigate to Authentication , followed by Login Type . Then navigate back
to the
Tools
menu option for
System Settings
. Select
Common Service Settings
and navigate to
Connectivity & Network Setup . Select Remote Authentication Server Settings , followed by
Authentication Systems
. Then select
Kerberos (Windows 2000)
. Enter the network settings for the
Authentication server by selecting Kerberos Server Settings.
To configure the Authentication settings from your computer, you must use CentreWare Internet
Services.
Note: Verify that your Common Access Card reader is plugged in and operational.
1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter to
open CentreWare Internet Services.
2. Click the
Properties
tab.
3. Enter the system administrator User Name and Password (default
admin
,
1111
) if prompted.
4. Click the
Security
folder.
5. Select the option for
Authentication Configuration
, and select
Login to Remote Accounts
from
the pull down menu. After selected, press the Apply button. The system will automatically reboot.
6. While still in the Security folder, scroll down and click the Remote Authentication
Servers/Authentication System Settings
folder.
7. Locate and select the
Authentication System
folder.
8. Press the pull down arrow and select the option for
Kerberos (Windows 2000)
and select
Apply
.
9. Enter the Kerberos server network address and realm name for all available Kerberos servers.
10. When entering the domain names, make sure to use ALL CAPS in the field.
Configuring the CAC Device Access Control
Note: This installation process can also be performed at the printer. This can be done by logging in as
the System Administrator, selecting the Machine Status button, then proceeding to the Tools tab and
navigating to the
Authentication /Security Settings
button. From the
Authentication/Security
Settings button, continue to navigate to Authentication , followed by Access Control .
1. Continuing from the previous setup, select
Authentication Configuration
in the
Security
folder.
2. Select either the
Device Access
configure button, or the
Service Access
configuration button.
3. If you select the
Device Access
configure button, the following window will appear.