Xerox WORKCENTRE 7428, System Administrator Manual, Page: 138 / 208

Scanning and Faxing
WorkCentre 7425/7428/7435
System Administrator Guide 138
Installing and Using the Network Scanner Utility
To retrieve scanned documents directly from a folder into an image-editing application such as
Adobe® Photoshop®, you need to install the Network Scanner Utility (scan driver) on your computer.
You can additionally install and use Network Scanner Utility 3 to view and import scanned files,
without using a client-side image-editing program. For Network Scanner Utility 3 installation
instructions, refer to instructions contained on the Driver/Network Utility CD ROM that came with the
printer.
Before Installing the Network Scanner Utility
Before installing the Network Scanner Utility, make sure that your computer meets the following
requirements:
•
You must be running Windows XP or Windows 2000. Windows 2000 Server/Advanced Server
Terminal Service is not compatible with this feature.
• Your computer must be operating with a i486DX4/100 MHz processor or faster, have 32 MB RAM
or greater, and have 40 MB or more of free hard drive space (not including space for storing
scanned data).
• Your computer must be connected to a network using the TCP/IP protocol.
• Your image-editing application must be compatible with the TWAIN interface to import scanned
data.
Installing the Network Scanner Utility
1. Insert the Driver/Network Utility (Windows) CD ROM into your computer’s CD drive.
2. Open Windows Explorer, click the drive letter for your CD ROM drive, and open
Drivers\Scan\Disk1 .
3. Double click Setup.exe and follow the instructions displayed on screen.
Uninstalling the Network Scanner Utility
1. From the Windows 2000 desktop, from the Start menu, select Settings , Control Panel , then double
click
Add/Remove Programs
. On the Windows XP desktop, click
Start
,
Control Panel
, then double
click Add/Remove Programs .
2. Select Fuji Xerox Network Scanner Utility , then click Add Remove .
3. Click Yes .
Importing Scanned Data from the Folder to an Image-Editing Application
1. Start a TWAIN-compatible application program, such as Photoshop.
2. From the
File menu, select the command for selecting the scan source (Import/Twain Source, in
Photoshop).
3. Select
FX Network Scan
from the displayed list and click
Select
.