
Scanning and Faxing
WorkCentre 7425/7428/7435
System Administrator Guide
122
Installation Procedure
This section describes the configuration procedure to use the Scan to PC (FTP/SMB) feature on the
printer.
The following two steps are necessary to use the Scan to PC (FTP/SMB) feature.
1. Enable the required ports and set TCP/IP. Enable the FTP port and SMB port on the printer, and
then set the printer’s IP address. If you will be using SMB on a Microsoft Network, make sure to
enable either DNS or WINS as part of the TCP/IP configuration. For FTP, make sure that DNS is
enabled.
2. Preparing an FTP directory or SMB shared folder on the receiving computer (server or computer).
Create an FTP directory or SMB shared folder to receive scanned documents over the network.
Enabling Ports and Setting TCP/IP
To use Scan to PC (FTP/SMB) you need to enable the applicable Ports (SMB or FTP client) on the printer,
and make sure that an IP address has been set on the printer.
Note:
The configuration can also be performed using CentreWare Internet Services. For information,
see
CentreWare Internet Services
on page 23.
1. Press the
Log In/Out
button on the control panel.
2. Enter the
System Administrator’s Login ID
and
Passcode
if prompted (default
admin
,
1111
), and
press
Enter
.
3. Press the
Machine Status
button.
4. Touch the
Tools
tab.
5. When using the SMB protocol, enable the SMB port.
a. Select
Connectivity & Network Setup
.
b. Select
Port Settings
.
c. Select
SMB
and then select
Change Settings
.
d. Select
Port Status
and then select
Change Settings
.
e. Select
Enabled
then select
Save
.
f. Select
Close
until the Port Settings screen is displayed.
6. When using the FTP protocol, enable the FTP client port.
a. From the Tools tab, select
Connectivity & Network Setup
, then
Port Settings
.
b. From the Port Settings screen, select
FTP Clien
t and then select
Change Settings
.
c. Select
Port Status
and then select
Change Settings
.
d. Select
Enabled
then select
Save
.
e. Select
Close
repeatedly until the Tools screen is displayed.
Summary of Contents for WORKCENTRE 7428
