Print Driver Installation
WorkCentre 7425/7428/7435
System Administrator Guide
15
NetBIOS over IP Client/Server Printing
Before You Start
1. Obtain the print driver for your computer's operating system. See
Obtaining Drivers
on page 13.
2. Print a
Configuration Report. See
Configuration Report
on page 22.
3. On the Configuration Report, verify that SMB is enabled. Also, verify that TCP/IP is enabled as one
of the supported protocols. To enable SMB, see
Microsoft (NetBIOS over IP) Networks
on page 52).
4. Set Up a Server to Queue Jobs to the Printer. If you have not already set up a Server, for a quick-
step set up procedure, for help see
Microsoft (NetBIOS over IP) Networks
on page 52.
Windows Print Driver Installation
Verify that the Correct Protocols and Services are Installed in the Computer
1. Verify that the Internet protocol (TCP/IP) is installed in the Computer. On the Windows XP desktop,
click
Start
,
Control Panel
, and double click
Network Connections
. Right click the
Local Area
Connection
icon and select
Properties
.
On the Windows 2000 Desktop, right click the
My Network Places
icon and select
Properties
. Right
click the
Local Area Connection
icon and select
Properties
.
2. Verify that the Internet Protocol (TCP/IP) has been loaded. If it has, click this item and click the
Properties
button to verify that this computer is using either a dynamic or static method to obtain
a valid TCP/IP address.
3. Also verify that this computer is using a DNS (or WINS) Server for resolution of the NetBIOS Host
name (typically the same name as the computer's Internet host name). If the TCP/IP protocol is
not loaded, click the
Install…
button, then select
Protocol
as the type of network component that
you wish to install. Click the
Add…
button and select
Internet Protocol (TCP/IP)
.
4. With your operating system installer disk readily available, click the
Have Disk…
button and follow
any remaining instructions.
5. Verify that the
Client for Microsoft Networks
is installed in the computer. On the Windows XP
desktop, click
Start
,
Control Panel
, and double click
Network Connections
. Right click the
Local
Area Connection
icon and select
Properties
.
On the Windows 2000 Desktop, right click the
My Network Places
icon and select
Properties
. Right
click the
Local Area Connection
icon and select
Properties
.
6. If the Client for Microsoft Networks is not loaded, click the
Install…
button, then select
Client
as
the type of network component that you wish to install.
7. Click the
Add…
button and select
Client for Microsoft Networks
.
8. With your operating system installer disk readily available, click the
Have Disk…
button and follow
any remaining instructions.
Add the Printer to the Windows Desktop
1. On the desktop, from
Start
, select
Printers and Faxes
.
2. Double-click
Add Printer
. From
Printer Tasks
, select
Add a printer
.
3. When the Add Printer Wizard displays, click
Next
.
4. Select
Network Printer
and click
Next
.
Summary of Contents for WORKCENTRE 7428
