Xerox WORKCENTRE 7428, System Administrator Manual, Page: 70 / 208

Security
WorkCentre 7425/7428/7435
System Administrator Guide 70
Configuring Xerox Secure Access with Remote Authentication
To configure Xerox Secure Access with Remote Authentication:
1. Open your Web browser and enter the IP address of the printer in the address field. Press
Enter to
open CentreWare Internet Services.
2. Click the
Properties
tab.
3. If prompted, enter the system administrator user name and password (default:
admin
,
1111
).
4. Click the
Security
folder, then
Authentication Configuration
.
5. In the Authentication Configuration > Step 1 of 2 page:
a. Select
Xerox Secure Access
from the
Login Type
drop down list.
b. Select the
Print Stored File from Folder
, or
Folder to PC/Server Enabled
check boxes to enable
these services.
c. Select the Non-account Print: Enabled check box if you wish to allow printing for a user
without and account.
d. Select
Apply
, then reboot the printer after the prompt.
e. Select
Next
to continue to the Authentication Configuration > Step 2 of 2 page.
6. In the Authentication Configuration > Step 2 of 2 page, click
Configure
next to
Authentication
System .
7. In the Authentication System page:
a. Select Authentication Agent from the Authentication System Settings drop down list,
b. Set the Server Response Time-out , and Search Time-out .
c. Select the Assign UPN (User Principal Name): Enabled check box to assign a user principal
name.
d. Select
Apply
, then reboot the printer after the prompt.
8. To set service access:
a. Refresh your Web browser.
b. Click the
Security
folder, then
Authentication Configuration
.
c. In the Authentication Configuration > Step 1 of 2 page, click
Next
.
d. Under Device Default State Configuration, click
Configure
next to
Service Access
.
e. Select one of the following for each service you want to control:
•
Unlocked
: Allow unrestricted access.
•
Locked (Show Icon)
: Require login for access. The service icon is visible to all users in the all
services screen.
• Locked (Hide Icon) : Require login for access. The service icon is hidden until an authorized user
logs in.
f. Click
Apply
and enter the Administrator User name and password when prompted (default of
admin and 1111 ).
g. Click OK .
h. Click Reboot Machine when it displays on screen.