Network Management
WorkCentre 7425/7428/7435
System Administrator Guide
54
IPP Configuration
The Internet Printing Protocol provides a convenient way to print over the Internet or Intranet using
the printer's IP address. To support this type of printing, make sure that Port 9100 is enabled at the
printer. Click
Port Status
in the Connectivity folder on the Properties Tab of CentreWare Internet
Services and make sure that the check box on the Port 9100 line is checked. The Internet Printing
Protocol must also be enabled at the printer, and the Internet Print Service must be available and
installed on the individual computer's version of Windows. IPP support is already built into Windows
operating systems. For other desktop operating systems it is available as a download from Microsoft at
www.microsoft.com. The final step is to install the IPP print driver. For more information, see
Driver Installation
on page 13.
Changing IPP Settings at the Printer
1. Press the
Log In/Out
button on the control panel.
2. Enter the
System Administrator’s Login ID
and
Passcode
if prompted (default
admin
,
1111
), and
press
Enter
.
3. Press the
Machine Status
button.
4. Touch the
Tools
tab.
5. Press
Connectivity & Network Setup
.
6. Press
Port Settings
.
7. Press the
IPP
selection line on the Port Settings menu.
8. Press the
Change Settings
button in the lower right corner of the Port Settings menu screen.
9. When the IPP selection menu displays, note that you have two selections available on numbered
horizontal lines. The first selection is Port Status. The second is IPP – Added Port Number. The Close
button in the upper right corner of the screen returns you to the Port Settings menu. After pressing
the horizontal line selection, to access available settings press the
Change Settings
button in the
lower right corner of the touch screen.
Port Status (IPP Enablement)
1. On the IPP selection menu, press
Port Status
.
2. Press the
Change Settings
button.
3. On the IPP Port Status screen, note which of the two buttons is highlighted as the current setting
for IPP Enablement. The available settings are Enabled or Disabled. To print with IPP, this setting
must be
Enabled
.
4. To change settings, press your setting of choice, then press the
Save
button.
5. To exit the screen, without making any changes, press the
Cancel
button.
Summary of Contents for WORKCENTRE 7428
