Xerox WORKCENTRE 7428, System Administrator Manual, Page: 59 / 208

AS400 Printing
WorkCentre 7425/7428/7435
System Administrator Guide
59
AS400 Printing
AS400 Raw TCP/IP Printing to Port 9100 (CRTDEVPRT)
This is the procedure to set up printing to a printer from an AS/400 using the SNMP drivers. This
procedure is intended for users familiar with the AS/400 system, especially those experienced with
printing in an AS/400 environment. The AS/400 must run V4R5 of OS/400 so that the SNMP drivers are
present (or V4R3/V4R4 with the most current PTFs installed). The printer must have port 9100 enabled.
To enable port 9100
1. Open your Web browser and enter the IP address of the printer in the address field. Press
Enter
to
open CentreWare Internet Services.
2. Click the Properties tab.
3. Enter the system administrator User Name and Password (default admin , 1111 ) if prompted.
4. Click the Connectivity folder.
5. Click the Protocols folder.
6. Select Port 9100 in the directory tree.
7. Ensure the Enabled box is checked to enable Raw TCP/IP Printing.
8. Leave the TCP Port Number set to 9100 for Port 1.
9. Leave the Bidirectional and Maximum Connections settings at their default values.
10. Set the End of Job Timeout to the number of seconds to wait before processing a job without an
End Of Job indicator.
11. Leave the
PDL Switching Enabled
box at its default value.
12. Click
Apply
to accept the changes,
Undo
to return the settings to their previous values, or
Default
All to enter printer defaults for all settings (recommended).
Note: The settings are not applied until you restart the printer.
13. Click the Status Tab .
14. Click the Reboot Machine button and click OK to reboot the printer. The network controller takes
approximately 5 minutes to reboot and network connectivity will be unavailable during this time.