Wfly ET Series, Instruction Manual

Page: 57 / 131

Servo Reverse
12 6
11 5
10 4
9 3
8 2
7
1 Aileron
Elevator
Throttle
Rudder
Gear
AUX6
AUX6
AUX5
AUX4
AUX3
AUX2
AUX1
Normal
Normal
Revers
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
? Sure?
Yes No
Servo Reverse
Click the reverse operation
Before reverse
Positive
After reverse
Negtive
Interface path: WFLY → [General Menu] → [Servo Reverse]
This function reverses the direction of motion of each channel servo.
For helicopters with a swash structure (HR-3, etc.), first use [Servo Reverse] to match the direction of the
pitch servo, and then use the swash AFR function to set the direction of the ailerons and elevators.
In some airplaneg/glider mixing settings, multiple servos control the same function. Whether to reverse
the airplane or reverse the function setting is very complicated and difficult to distinguish. For specific
functions, be sure to perform adequate physical inspection before flying.
The throttle channel (3CH) is
reversed at the initial setting. Please
carefully check the throttle direction of
the engine and motor, taking care not to
suddenly turn on the power at full
speed. When using an electric model,
please do not care if the propeller or
rotor is not installed.Identify the
direction of movement of the electric
and stick.
Connecting a propeller or a rotor can
easily cause accidental rotation and
lead to serious dangers such as injury.
Before each flight, carefully check
whether the system type, model type,
steering action, direction of motion,
and switch settings are correct or not.
057
General Menu
DANGER
WARNING