Wfly ET Series, Instruction Manual

Page: 98 / 131

098
Model Menu\Airplane
Gyro
Gyro
Gyro
Mode
Position
Condition1
Type
AVCS
Status INH
Condition
Gyro 1
1/2
Gyro
Rate
Tuning
AVCS100%
- -
+0% +0%
2/2
Gyro
Gyro
Mode
Position
Switch
Type
Status
1
- -
AVCS
INH
Switch
Gyro 1
1/2
Interface path: WFLY → [Model Menu] → [Gyro]
This function is used to adjust the gyroscope sensitivity. Set the sensitivity and mode of operation
(normal/AVCS) for each flight condition or switch.
Generally, when only the normal AVCS(lock tail) application is applied, it is only necessary to set a set of
gyroscopes.
C
o
n
d
it
io
n
m
o
d
e
S
w
it
c
h
m
o
d
e
3 channels can be set separately, Gyro\Gyro2\Gyro3.
The control gyro sensitivity can be activated by "Flight
Condition" or by assigning switches, knobs, and so on.
The five "Condition" can set the gyroscope sensitivity
separately.
The sensitivity value of the specified position of the
activation switch can be controlled by customizing
switches, knobs, etc.
Normal mode, (AVCS) lock tail mode
Set the associated tuning control switch, knob, etc. for
sensitivity adjustment
Gyro operation mode. Normal, AVCS100%
Can set the tuning range value ±20%
Control switch current real-time position
Inhibit and enable the current Gyro configuration group
Each control switch can set the gyroscope sensitivity
separately, and can set five kinds of sensitivity.
Function setting
1 When using the function, first assign the function channel on the [Function] interface, and set the
“Switch” and “Tuning” to [--] in [Function].
2 Mode selecting. Optional "switch" or "Flight condition".
3 Position selecting. In each mode, there are 5 groups of positions to choose from, and the
corresponding sensitivity can be set separately. In the "switch" mode, you need to select the position
switch, the default is [--].
4 Status selecting. Select whether the "Position" configuration above is enabled or not.
5 Type selecting. Select the sensitivity type of the corresponding work for the current "position".
6 Ratio adjustment. The options vary depending on the type option ("Normal" type, "Rate" range 0%-
100%; under "AVCS" type, "Rate" range is Normal[0~100%], AVCS[0~100%]) .
7 Tuning the switch selection and tuning the ratio setting. Sensitivity tuning switch, the default is [--]; the
rate value can be set to ±20%. Used for tuning the sensitivity.
The sensitivity required for different flight modes is different, so switch the conditions (Position)
separately for sensitivity adjustment.