Wfly ET Series, Instruction Manual

Page: 44 / 131

Receiver Output
Port
1
2
3
4
5
Port
6
7
8
9
CH
1
2
3
4
5
CH
6
7
PPM/W.BUS
Reset
W.BUS2
Receiver Output
Port
1
2
3
4
5
Port
6
7
8
9
CH
7
8
3
9
10
CH
11
12
Reset
W.BUS2
PPM/W.BUS
Receiver Output
Interface path: WFLY → [Linkage Setting] → [Receiver Output]
This function is used to customize the port output function channel of the receiver. For the
corresponding channel function, please go to [Function] of [General Menu] to set.
All ports can be customized channels, but PPM and W.BUS can only be set to 8 ports, and W.BUS2
can only be assigned to 9 ports.
(RF209S receiver).
Note: [Receiver Output] needs to be set with only one receiver connected.
Port setting instructions:
1 As shown above, port 1, the system defaults to channel 1, you can also set to 2-18 channels.
2 The Reset button resets all ports to their default configuration.
*Set the receiver to be connected, enter the interface to read the current receiver parameters, exit the
interface and save the current receiver settings.
Mode A Mode B
044
Linkage Setting