Model Menu\Multicopter
124
Condition
- -
- -
- -
- -
Delay
Condition2
Condition3
Condition4
Condition5
Condition1
Condition
Interface path: WFLY → [Model Menu] → [Condition]
With this function, flight conditions can be configured as needed, and there are 5 flight conditions to
choose from.
If you do not need to use the conditional switching function, you do not have to set it on this page. The
default configuration can be used directly.
When multiple flight conditions are set, the priority between them is to prioritize the final flight conditions!
Delay: Avoid swaying of the fuselage caused by sudden changes in the position of the steering gear or
the unsynchronized action time between the passages when switching flight conditions.
Switch Description:
Condition
logic
Mode
logic
And
SwitchB
- -
SwitchA
- -
Separate, single switch control; logic, combined
switch control.
"AND" mode: The flight conditions can be switched
when both switches are turned on.
"OR" mode: As long as one switch is turned on, the
flight conditions can be switched.
XOR mode: When the positions of the two switches are
reversed, the flight conditions can be switched.
* "On", "Off": When the switch is selected, the selected
gear position or position.
Condition
9
4
8
10
3
5
7
2
6
1 Aileron
Rudder2
Throttle
Gear
Rudder
Flap
Aileron2
Flap2
Camber
Elevator
0
0
0
0
0
0
0
0
0
0
1/2
Channel
Channel
Delay
Delay
12 channels can be
individually set to delay
Assign control switch:
By default, there is no switch assignment (--),
click to enter the assignment interface. Switching between flight
conditions can be performed using switches such as a toggle switch, a
stick, and a lever. Set the unwanted flight condition switch to empty (--).
Each flight condition can be set
separately for the
corresponding delay, and the
set control switch can be
activated to set the delay value
of each channel corresponding
to the flight condition.
Rename:
Which condition
needs to be modified, click on
the name bar on the left to
directly rename the operation.
Long press the name to reset
the default name
Click to delay
configuration interface
Summary of Contents for ET Series
Page 52: ...052 Linkage Setting ...
Page 130: ...130 ...
