Wfly ET Series, Instruction Manual

Page: 66 / 131

Double engine
Interface path: WFLY → [General Menu] → [Double Engine]
The output channels of Engine 1 and Engine 2 need to be set in the [General Menu] - [Function] menu.
When part of the model aircraft, ship model, and car model use two motors as the power drive, the dual
engine function can be directly used, and the engine 1, the acceleration rocker and the steering stick of the
engine 2, and the engine 1 and the engine 2 can be simply set. Mixing rate. In the robot model and the ship
model, the bidirectional electronic governor ratio setting is supported, and the control direction can be
quickly switched by setting a forward and reverse switch. Double engine function supports 3 rate settings,
each rate supports separate control switches.
Double engine
Reverse
Forward
Backward
THR H/W
Engine1 Engine2
0
%
0
%
-100
%
-100
%
- -
- -
NOR
2/4
Accelerate stick:
Control engine 1 and engine 2
rotate at the same speed to
achieve forward or backward.
Positive and negative:
Set the control switch for
controlling the positive/negative
Forward: set the forward rate
Back: set the ratio of the back
Double engine 3/4
Reverse
RUD
(
L
)
RUD
(
R
)
RUD H/W
Engine1 Engine2
+50
%
+100
%
+100
%
+50
%
- -
- -
NOR
Direction stick:
Control engine 1, engine 2
rotates at a differential speed,
Implement left or right turn.
Positive and negative:
Set the control switch for
controlling the positive/negative
Direction (left): Set the ratio of the left turn
Direction (right): set the ratio of right turn
Double engine
Switch
Rate
ESC mode
Status
Unidir
INH
1 2 3
50 % 2 0 %
1/4
- - - -
Function status button (INH, ACT, default [INH])
Unidir: one-way electronic governor such as empty mode
(acceleration only supports setting forward)
Bidir: two-way electronic governor for ship model, car model, robot,
etc. (Acceleration support settings forward and backward)
Switch: Supports 3 ratios and control switch settings.
The priority ratio 3 is the highest.
Rate: equivalent to size action, supports switching of 3 different
ratios.
Derection stick(one way)
Direction stick(Two way)
Turn left
Turn left
-
50
%
-
100
%
0
%
+
100
%
Engine1
Engine1
Engine2
Engine2
Turn right
-
50
%
0
%
Engine1 Engine2
Turn right
-
100
% +
100
%
Engine1 Engine2
The output of the default parameter
Accelerate stick
Forward
-100
%
-100
%
Engine1 Engine2
Backward
( )
Dibir
+100
%
+100
%
Engine1 Engine2
Double engine 4/4
Status
Switch
Engine hold
Engine1
Engine2
-152
%
-152
%
INH
- -
Hold function control switch
assignment
Engine hold working status
Throttle hold position
066
General Menu