Viavi CellAdvisor 5G, User Manual

Page: 219 / 359

CellAdvisor 5G User's Guide
207
Viewing the logging data
1 Load the saved logging file using the Load icon ( ) on the side bar. Make sure the file extension is
. gomv
.
2 If the PCI is set to Auto, the point on the map appears with a color representing the largest P-SS RSRP value.
When you select a point on the map, a marker appears, and the Information window appears on the right panel.
3 Set the PCI to Manual and tap the Select button.
The Select PCI window appears.
4 Select PCI on the left and then the corresponding Beam Index appeared on the right.
5 Tap the Apply button.
The point color of the map changes to the corresponding SS-RSRP value, and if there is no detected Beam Index, the point will
be hidden.
NOTE:
When you load the result file, a pop-up message asking whether you want to load data only or data with map
appears. If the current screen does not display all the loaded data, the screen mode will be automatically changed
to Full.
Setting limit
You can set the thresholds for the two different color indicators. The maximum value is the Limit for Excellent , and the minimum
value is the Limit for Poor . See below to check the plot point color based on the Legend Color Table.
1 Tap the rectangle with value before color legend bar on the right panel.
2 Set a value for Poor (minimum value) using the on-screen keyboard.
3 Tap the rectangle with value after color legend bar on the right panel.
4 Set a value for Excellent (maximum value) using the on-screen keyboard.
Importing cellsite DB
You can import the site DB by creating the 5G site information form.
1 Create the 5G site information with an excel file as below.