Viavi CellAdvisor 5G, User Manual

Page: 175 / 359

CellAdvisor 5G User's Guide
163
NOTE:
Enabling the time cursor puts the measurement on hold and you can make post-processing analysis for each
measurement over time using the time cursor.
8 To start a new measurement, tap Reset .
9 Optional. To select the number of antenna ports, tap the MIMO and select 2x2 or 4x4 .
10 Optional. To select the Cyclic Prefix, tap Cyclic Prefix and select Normal or Extended .
OTA Datagram measurement with LTE/LTE-A TDD Analyzer
Route Map
LTE route map traces the power level of the strongest LTE signal in terms of RSRP corresponding a particular time and
geographical position and presents it in a geographical map as a measurement point. All the collected measurements can be
exported for post-processing purposes, including data of the strongest LTE signal for each measurement point, including its
measurement time and geographical location.
Loading a map
To use any features related to maps, you need to download and install the maps on the CellAdvisor 5G. The VIAVI JDMapCreator
will help you download maps. Make sure the JDMapCreator application on your computer is connected to the instrument via LAN.
You can send a map file with a single layer to the instrument directly by using the
Send to EQP menu in JDMapCreator. For more
information on how to use the JDMapCreator, see the JDMapCreator 2.0 User Guide .
1 Plug in your USB flash drive that has a map file in
.mcf
file type created in JDMapCreator.
2 Tap the Load icon( ) on the side bar.
3 Navigate the map file you want to open.
The File Information panel displays the file properties including its name, size, type, and date modified.
4 Tap the Load button on the screen.
Once you loaded the map, you can also control the map using the following icons on the map.
Icon Description
Tap to go to your current location on the map. Once tapped, the purple icon appears on the map indicating your
current location.