Uniden BC346XT, User Manual

Page: 926 / 1059

CloseCall < UnidenMan4 < TWiki
Srch/CloCall Opt menu.
Hits with Scan
The scanner stores the 10 most recent close call hits to a temporary system; you can set
the options for this temporary system, just like you can for permanent systems. The
scanner deletes the 10 saved frequencies in this temporary system when you turn the
power off. If you want to save the any of these frequencies permanently, you need to
store them to a programmed system or use the CC Auto Store feature.
Set Quick Key
Assign this system or site to a Quick Key so you can easily enable or disable it during
scanning. Enter a number from 0 to 99; tap NO (the decimal point) if you don't want to
assign this system or site to a Quick Key. (For more information, see
Quick Keys .)
Set Number Tag
Assign a number to this system you can use to tune directly to the system. Choose a
number from 0 to 999. (For more information, see
Number Tags .) Note that you can only
set a system number tag for the Close Call system.
Set Lockout
Decide whether you want to lock out the system so the scanner will ignore it during Scan
and Search modes. If you lock out the system none of the found channels will be scanned
conventionally.
Unlocked: The system is not locked out.
Temporary L/O: The system is locked out until you turn the scanner off and back on.
Lockout: The system is permanently locked out.
Set Hold Time
Set the minimum number of seconds the scanner should spend checking this system or
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/CloseCall.html (2 of 5)5/26/2009 11:15:49 AM