Uniden BC346XT User Manual Download Page 608

Page: 608 / 1059

Thursday, May 14, 2009

Set Range

In this menu, the setting unit is determined by the setting in

Set Unit

When you select “mile” in

Set Unit

, the displayed unit will be mile.

When you select “km” in

Set Unit

, the displayed unit will be km.

The valid setting range is from 0.5 to 125.0, in 0.5 steps.

Press [E / yes / gps] to accept the setting and return to the previous menu.

Set GPS Enable

When this option is set to “On”, the scanner will control L/O status of this site by position information
received from a GPS.

The L/O state of this site is automatically controlled by position information.

Off

The L/O state of this site is not influenced by GPS.

Press [E / yes / gps] to accept and return to the previous menu.

Delete Site

You can delete the current site and all associated settings by select this menu item. The scanner prompts
"Confirm Delete?" to confirm deletion.

Press [E / yes / gps] to delete the current site.

Press [. / no / pri] to cancel deletion and return to the previous menu.

New Site

Press [E / yes / gps] to create a New Site and goes to

Creating a New Site

Summary of Contents for BC346XT




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BC346XT

Reviews:

Related manuals for BC346XT

Brands by name

Popular brands

Uniden BC346XT, User Manual

Search results

Summary of Contents for BC346XT

Reviews:

Related manuals for BC346XT

Brands by name

Popular brands