Uniden BC346XT, User Manual

Page: 306 / 1059

Thursday, May 14, 2009
57
If “DEG:DDD.dddddd” is selected in Set Pos Format , the display is the following.
Set Longitude
Enter the longitude data using the number keys.
Press any number key when the cursor is in the last position to toggle between west longitude (W) and
east longitude (E).
Then press [E / yes / gps] to accept and return to the previous menu.
If “DMS:DDD
⁰
MM’SS.ss” is selected in Set Pos Format , the display is the following.
Set Longi tude
000
⁰
00
’
00. 00 W
If “DEG:DDD.dddddd” is selected in Set Pos Format , the display is the following.
Set Longi tude
000. 0000 W
Set Range
In this menu, the setting unit depends on the setting in Set Unit .
When you select “mile” in Set Unit , the displayed unit is mile.
When you select “km” in Set Unit , the displayed unit is km.
The valid setting range is from 0.5 to 125.0 in 0.5 steps.
Press [E / yes / gps] to accept the setting and return to the previous menu.
Set Lati tude
00. 000000 N