Uniden BC346XT, User Manual

Page: 497 / 1059

248
<COMMAND SLI>
Get Search L/O TGID
Controller
→ Radio
SLI,[SYS_INDEX][\r]
Radio
→ Controller
SLI,[TGID][\r]
SLI,-1[\r]
: No more lockout TGID
This command is used to get Search L/O TGID list of the system.
Search L/O TGID is the L/O TGID which doesn't belong to any group in the
system as a TGID.
Compared with GLI command, this command doesn't return any L/O TGID which is
belong to one of group in the system.
You should call this command again and again to get all L/O TGID until the
scanner returns “-1”.
“-1” means that no more L/O TGID exists.
This command is only acceptable in Programming Mode.
<COMMAND ULI>
Unlock TGID (for Rvw L/O ID)
Controller
→
Radio
ULI,[SYS_INDEX],[TGID][\r]
Radio
→ Controller
ULI,OK[\r]
This command unlocks a L/O TGID in a system.
The TGID is deleted from L/O list.
This command is only acceptable in Programming Mode.
<COMMAND LOI>
Lockout ID (TGID)
Controller
→
Radio
LOI,[SYS_INDEX],[TGID][\r]
Radio
→
Controller
LOI,OK[\r]
This command locks out a TGID for the system.
The TGID is added to L/O list.
This command is only acceptable in Programming Mode.
<COMMAND REV>
Get Rev Index
Controller
→
Radio
REV,[INDEX][\r]
Radio
→
Controller
REV,[INDEX][\r]
[INDEX] : Index of system, site, group, channel, TGID or
Location Alert System.
Returns reverse(backward) index of the index in the memory chain.
Returns -1 if no more index exists.
This command is only acceptable in Programming Mode.