RMON Group
This switch supports the following four RMON Groups defined on the RMON standard
(RFC1757): History Group, Event Group, Statistic Group and Alarm Group.
RMON Group
Function
History Group
After a history group is configured, the switch collects and records
network statistics information periodically, based on which the
management station can monitor network effectively.
Event Group
Event Group is used to define RMON events. Alarms occur when an event
is detected.
Statistic Group Statistic Group is set to monitor the statistic of alarm variables on the
specific ports.
Alarm Group
Alarm Group is configured to monitor the specific alarm variables. When
the value of a monitored variable exceeds the threshold, an alarm event is
generated, which triggers the switch to act in the set way.
The
RMON
Groups can be configured on the
History, Event
and
Alarm
pages.
15.3.1
History
On this page, you can configure the History Group for RMON.
Choose the menu
SNMP
→
RMON
→
History
to load the following page.
Figure 15-10 History Control
Configuration Procedure:
Configure the history group for RMON. Click
Create
.
Entry Description:
Index:
Specify the index number of the entry.
Port:
Specify the port from which the history samples were taken, in
format as 1/0/1.
382
