Choose the menu
QoS > Auto VoIP > Auto VoIP Config
to load the following page.
Figure 12-22 Auto VoIP Config
Configuration Procedure:
1)
Enable the Admin mode of Auto VoIP.
2)
Select your desired ports and choose the interface mode and enter corresponding
interface value; choose the CoS override mode and click
Apply
.
3)
Configure the corresponding module based on the interface mode.
Entry Description:
Admin Mode:
Enable or disable the Admin mode of Auto VoIP.
UNIT:
Select the unit ID of the desired member in the stack.
Select:
Select the desired port for Auto VoIP configuration. It is
multi-optional.
Port:
Displays the port number of the switch.
320
