Choose the menu
Maintenance
→
Network Diagnose
→
Ping
to load the following page.
Figure17-8 Ping
Configuration Procedure:
1)
In the
Ping Config
section, enter the IP address of the destination device for Ping test, set
Ping times, data size and interval according to your needs, and then click Ping to start the
test.
2)
In the
Ping Result
section, check the test results.
Entry Description:
Destination IP:
Enter the IP address of the destination node for Ping test.
Ping Times:
Enter the amount of times to send test data during Ping testing. The
default value is recommended.
Data Size:
Enter the size of the sending data during Ping testing. The default
value is recommended.
Interval:
Specify the interval to send ICMP request packets. The default
value is recommended.
17.4.2
Tracert
Tracert test function is used to test the connectivity of the gateways during its journey from the
source to destination of the test data. When malfunctions occur to the network, you can locate
trouble spot of the network with this tracert test.
410
