Entry Description:
UNIT:1/LAGS:
Click
1
to configure the physical ports. Click
LAGS
to configure
the link aggregation groups.
Select:
Select the desired port for Rate configuration. It is
multi-optional.
Port:
Displays the port number of the switch.
Egress Rate:
Configure the bandwidth for sending packets on the port.
LAG:
Displays the LAG number which the port belongs to.
Note:
When egress rate limit feature is enabled for one or more ports, you are suggested to disable
the flow control on each port to ensure the switch works normally.
12.3.2
Storm Control
Storm Control function allows the switch to filter broadcast, multicast and UL frame in the
network. If the transmission rate of the three kind packets exceeds the set bandwidth, the
packets will be automatically discarded to avoid network broadcast storm.
Choose the menu
QoS
→
Bandwidth Control
→
Storm Control
to load the following page.
Figure 12-18 Storm Control
Configuration Procedure:
1)
Select the port(s) and configure the upper rate limit for forwarding broadcast packets,
multicast packets and UL frames.
2)
Click
Apply
.
315
