Choose the menu
Switching
→
Port
→ Loopback Detection
to load the following page.
Figure 6-6 Loopback Detection Config
Configuration Procedure:
1)
In the
Global Config
section, enable loopback detection and configure the global
parameters. Then click
Apply
to make the settings effective.
2)
In the
Port Config
section, select one or multiple ports for configuration. Then set the
parameters and click
Apply
to make the settings effective.
3)
View the loopback detection information on this page.
Entry Description:
Global Config
LoopbackDetection
Status:
Enable loopback detection globally.
Detection Interval:
Set the interval of sending loopback detection packets.
The value ranges from 1 to 1000 seconds and the default value
is 30 seconds.
60
