SNMP Trap status:
Displays the SNMP trap status of the Auto Copy Software
function.
Allow Downgrade:
Displays the status of allowing downgrade of the new members
in the Auto Copy Software function.
Stack Member Info
UNIT:
Displays the unit number of the switch.
Role:
Displays the stack role of the switch in the stack. There are two
options: Master and Member.
Priority:
Displays the member priority of the switch. The higher the value
is, the more likely the member will be elected as the master.
State:
Displays the state of the switch.
MAC Address
Displays the unique identification of the switch.
Preconfigured
Device Type:
Displays the device type of the pre-configured switch.
Plugged-in Device
Type:
Displays the device type of the plugged-in switch.
Switch Description:
Displays the description of the switch.
Version:
Displays the current software version of the switch.
SFS Last Attempt
Status:
Displays the status of the last stack firmware synchronization.
Up Time:
Displays the system up time of the switch.
Stack Port Info:
Stack Port:
Displays the stack port number.
Type:
Displays the transceiver type of the stack port
Product Name:
Displays the transceiver product name of the stack port.
Configured Stack
Mode
：
Displays the configured mode of the stack port.
Running Stack
Mode
：
Displays the running mode of the stack port.
Link Status
：
Displays the link status of the stack port.
Link Speed:
Displays the link speed of the stack port.
Neighbor:
Displays the unit id of the switch directly linked on the stack
port.
5.1.2
Stack Config
On this page you can configure the basic parameters of the stack function.
49
