The following entries are displayed on this screen:
IPv4 Protocol Configuration
IPv4 Protocol:
Specify IPv4 Address allocate mode of the management port.
None: Setup manually.
DHCP: Allocated through DHCP.
DHCP Client-ID:
The DHCP Client-ID (Option 61) is used by DHCP clients to
specify their unique identifier. This value is expected to be
unique for all clients in an administrative domain.
IP Address:
Specify the IP address of the interface when the
Management Port Configuration Protocol is None.
Subnet Mask:
Specify the Subnet Mask of the interface when the
Management Port Configuration Protocol is None.
Gateway:
Specify the Gateway of the interface when the Management
Port Configuration Protocol is None.
IPv4 Address List
Select:
Select the interfaces to modify or delete.
IPv4 Protocol:
Specify IPv4 Address allocate mode of the management port.
None: Setup manually.
DHCP: Allocated through DHCP.
IP Address:
Specify the IP address of the interface when the
Management Port Configuration Protocol is None.
Subnet Mask:
Specify the Subnet Mask of the interface when the
Management Port Configuration Protocol is None.
Gateway:
Specify the Gateway of the interface when the Management
Port Configuration Protocol is None.
Status:
Displays interface current working status: up or down.
4.1.7
Management Port IPv6
The Management Port is a dedicated Ethernet port for out-of-band management of the device.
Traffic on this port is segregated from operational network traffic on the switch ports and
cannot be switched or routed to the operational network. Use this page to configure IPv6
network information on the management port.
Choose the menu
System
→
System Info
→ Management Port IPv
6
to load the following page.
23
