12.2.3
Class Config
Choose the menu
QoS
→
DiffServ
→
Class Config
to load the following page.
Figure 12-13 Class Config
Configuration Procedure:
Select a class from the drop-down list. Define the criteria to associate with a DiffServ class, then
click
submit
.
Entry Description:
Class:
The name of the class. To configure match criteria for a class,
select its name from the menu.
L3 Protocol:
The Layer 3 protocol to use for filtering class types, which is
either IPv4 or IPv6.
Any:
Select this option to specify that all packets are considered to
match the specified class. There is no need to configure
additional match criteria if Any is selected because a match will
occur on all packets.
308
