Automatic
Recovery Time:
Set the recovery time globally, after which the blocked port in
Auto Recovery mode can automatically recover to normal
status.
It should be integral times of detection interval. The value
ranges from 1-100 and is 3 by default
Web Refresh
Status:
With this option enabled, the switch refreshes the web timely. By
default, it is disabled.
Web Refresh
Interval:
If you enabled web refresh, set the refresh interval between 3
and 100 seconds. The default value is 6 seconds.
Port Config
Status:
Enable loopback detection for the port.
Operation Mode:
Select the operation mode when a loopback is detected on the
port:
Alert:
The switch will display alerts. It is the default setting.
Port based:
In addition to displaying alerts, the switch will
block the port on which the loop is detected.
Recovery Mode:
If you select
Port Based
as the operation mode, you also need
to configure the recovery mode for the blocked port:
Auto:
The blocked port will automatically recover to normal
status after the automatic recovery time. It is the default
setting.
Manual:
You need to manually release the blocked port.
Click the
Recovery
button to release the selected port.
Loop Status:
Displays whether a loop is detected on the port.
Block Status:
Displays whether the port is blocked.
LAG:
Displays the LAG number the port belongs to.
Note:
1.
Recovery Mode is not selectable when Alert is chosen in Operation Mode.
2.
To avoid broadcast storm, we recommend that you enable storm control before loopback
detection is enabled.
61
