16.4.2
Port Config
On this page you can configure all ports' LLDP-MED parameters.
Choose the menu
LLDP
→
LLDP-MED
→
Port Config
to load the following page.
Figure 16-7 LLDP-MED Port Configuration
Configuration Procedure:
1)
Select your desired port and enable LLDP-MED. Then click
Apply
to make the settings
effective.
2)
Click
Detail
to configure the included TLVs in outgoing LLDPDU on the following page.
Figure 16-8 Configure TLVs of LLDP-MED Port
Entry Description:
UNIT:
Select the unit ID of the desired member in the stack.
Select:
Select the desired port to configure.
398
