forward packets sent to this IP address. This will allow any Virtual Router IP address on the LAN
to be used as the default first hop router by end hosts.
Choose the menu
Routing
→
VRRP
→
Basic Config
to load the following page.
Figure10-60 VRRP Basic Config
Configuration Procedure:
1)
Enter the VRID to identify the VRRP group.
2)
Select an interface and assign a virtual IP address for the VRRP group.
3)
Click
Create
.
Entry Description:
VRRP Basic Config
VRID:
Enter the VRID only if you are creating a new VRRP group.
The VRID ranges from 1 to 255.
Interface:
Select the VLAN interface ID or router interface ID for the
new VRRP group.
Virtual IP:
Assign a virtual IP address for the new VRRP group. It must
be on the same network segment as the IP address of the
interface where the VRRP group is configured.
Create:
Click the button to add a new VRRP group.
Clear:
Click the button to clear the configuration.
VRRP Table
Select:
Select one or more items.
VRID:
Displays the VRID associated with the VRRP group.
Interface:
Displays the Interface ID associated with the VRRP group.
Interface IP:
Displays the IP Address associated with the selected
interface.
244
