Global Config
RIP Version:
Choose the global RIP version.
Default: send with RIP version 1 and receive with both
RIP version 1 and 2.
RIPv1: send and receive RIP version 1 formatted
packets via broadcast.
RIPv2: send and receive RIP version 2 packets using
multicast.
Split Horizon Mode:
Choose the Split Horizon Mode.
None: no special processing for this case.
split-horizon: a route will not be included in updates sent
to the router from which it was learned.
Poison Reverse: a route will be included in updates sent
to the router from which it was learned, but the metric
will be set to infinity.
RIP Distance:
Set the RIP router distance.
Auto Summary:
If you select enable groups of adjacent routes will be
summarized into single entries, in order to reduce the total
number of entries The default is disable.
Default Metric:
Set the default metric for the redistributed routes. The valid
values are (1 to 15).
Redistribute Static:
Choose to distribute Static router entries to RIP, the default
is disable.
Redistribute OSPF:
Choose to distribute OSPF router entries to RIP, the default
is disable.
Redistribute Static
Metric:
Set the metric of redistributed Static routes. The valid values
are (0 to 15).
Redistribute OSPF
Metric:
Redistribute OSPF Metric. Set the metric of redistributed
OSPF routes. The valid values are (0 to 15).
Update Timer:
The timer interval to generate a complete response to every
neighboring gateway.
Timeout Timer:
Upon expiration of the timeout, the route is no longer valid
and set to unreachable.
Garbage Timer:
Upon expiration of the garbage-collection timer, the route is
finally removed from the tables.
Network Enable
You could add the network to enable RIP protocol here, so the interface in the network would
enable RIP protocol.
RIP Network List
Display the network enabled in the list. You could choose to delete the network here.
199
