10.10.4
Track Config
You can configure track information for virtual routers. When the uplink interface of the master
router is down, service will be interrupted since VRRP cannot detect the status change of
interfaces outside the VRRP group. You can configure interface tracking to track the uplink
interface. In this way, the priority of the master router can be reduced when the tracked
interface is down, and the backup router will take over traffic. This ensures continuity for
network communication.
Choose the menu
Routing
→
VRRP
→
Track Config
to load the following page.
Figure10-64 Track Config
Configuration Procedure:
Select the interface and VRID associated with your desired VRRP group and add track
information for the VRRP group. Then Click
Create
.
Entry Description:
Add Track
Interface:
Select the interface associated with your desired VRRP
group.
VRID:
Select the VRID associated with your desired VRRP group.
Tracked Interface:
Specify the interface to be tracked.
Reduced Priority:
Specify the priority to reduce if the tracked interface is
down. After reducing this value, the priority of the master
router should be smaller than the priority of the backup
router.
Track Table
Select:
Select one or more items.
VRID:
Displays the VRID associated with your desired VRRP group.
249
