Reference Class:
Select this option to reference another class for criteria. The
match criteria defined in the referenced class is as match
criteria in addition to the match criteria you define for the
selected class. After selecting this option, the classes that can
be referenced are displayed. Select the class to reference. A
class can reference at most one other class of the same type.
CoS:
Select this option to require the Class of Service (CoS) value in
an Ethernet frame header to match the specified CoS value.
Inner CoS:
Select this option to require the secondary CoS value in an
Ethernet frame header to match the specified secondary CoS
value.
EtherType:
Select this option to require the EtherType value in the Ethernet
frame header to match the specified EtherType value.
VLAN:
Select this option to require a packet's VLAN ID to match a
VLAN ID.
Inner VLAN:
Select this option to require a packet's VLAN ID to match a
secondary VLAN ID.
S-MAC:
Select this option to require a packet's source MAC address to
match the specified MAC address.
D-MAC:
Select this option to require a packet's destination MAC address
to match the specified MAC address.
S-IP:
Select this option to require the source IP address in a packet
header to match the specified values.
D-IP:
Select this option to require the destination IP address in a
packet header to match the specified values.
S-IPv6:
Select this option to require the source IPv6 address in a packet
header to match the specified values.
D-IPv6:
Select this option to require the destination IPv6 address in a
packet header to match the specified values.
S-Port:
Select this option to require a packet's TCP/UDP source port to
match the specified port number.
D-Port:
Select this option to require a packet's TCP/UDP destination
port to match the specified port number.
DSCP:
Select this option to require the packet's IP DiffServ Code Point
(DSCP) value to match the specified value.
IP ToS:
Select this option to require the packet's Type of Service (ToS)
bits in the IP header to match the specified value.
IP Pre:
Select this option to require the packet's IP Precedence value to
match the number configured in the IP Precedence Value field.
309
