Configuration Procedure:
Select and configure your desired ports or LAGs. Then click
Apply
to make the settings
effective.
Entry Description:
Group:
Displays the ID of the group for configuration.
Group Name:
Give a group name for identification.
Protected Ports:
Select member ports in this group.
Protected ports in the same group cannot forward traffic to
each other, even if they are in the same VLAN. But the protected
ports can forward traffic to the unprotected ports and the ports
that are in a different group.
6.1.5
Loopback Detection
Loopback Detection allows the switch to detect loops in the network. When a loop is detected
on a port, the switch will display an alert on the management interface and further block the
corresponding port according to your configurations.
59
