Operation:
Select the operation for the switch to process packets which match
the rules.
Permit:
Forward packets.
Deny:
Discard Packets.
S-IP:
Enter the source IP address contained in the rule.
Mask:
Enter IP address mask. If it is set to 1, it must strictly match the
address.
Time-Range:
Select the time-range for the rule to take effect.
S-Condition:
Select S-Condition to limit the transmission rate of the data packets.
Rate:
The transmission rate of the data packets. Valid values are (1 to
1000000) in Kbps.
Qos Remark:
Select QoS Remark to forward the data packets based on the QoS
settings.
S-Mirror:
Select S-Mirror to mirror the data packets to the specific port.
Redirect:
Select Redirect to change the forwarding direction of the data
packets.
Port:
Redirect or mirror the data packets to the specific port.
13.2.5
Extend-IP ACL
Extend-IP ACLs analyze and process data packets based on a series of match conditions,
which can be the source IP addresses, destination IP addresses, IP protocol and other
information of this sort carried in the packets.
328
