Entry Description:
Server IP:
Enter the IP of the server running the RADIUS secure protocol.
Shared Key:
Enter the shared key between the RADIUS server and the switch.
The RADIUS server and the switch use the key string to encrypt
passwords and exchange responses.
Auth Port:
Specify the UDP destination port on the RADIUS server for
authentication requests.
Acct Port:
Specify the UDP destination port on the RADIUS server for
accounting requests.
Retransmit:
Specify the number of times a request is resent to a server if the
server does not respond.
Timeout:
Specify the time interval that the switch waits for the server to
reply before resending.
14.7.2
Server Config
This page is used to configure the authentication servers running the security
protocols.
Choose the menu
Network Security
→
AAA
→
Conifg
to load the following page.
Configuration Procedure:
Configure the server’s IP and other relevant parameters under the Server Config.
View, edit and delete the configured servers in the Server list.
Entry Description:
Server IP:
Enter the IP of the server running the secure protocol.
Shared Key:
Enter the shared key between the server and the
switch. The server and the switch use the key string to
encrypt passwords and exchange responses.
361
