IP Address Mode:
Displays the IP address allocation mode.
None
: Without IP address.
Static
: Setup manually.
DHCP
: Allocated through DHCP.
IP Address:
Displays the IP address and subnet mask of the interface.
Secondary IP:
Displays the secondary IP address and subnet mask of the
interface.
Interface Status:
Displays the interface current working status, which is up when
Admin Status is enable, line protocol is up and IP address is set.
Admin Status:
Displays the Admin status. Choose '
Disable
' to disable the
interface's Layer 3 capabilities.
Interface Setting Detail Information
Displays the detailed setting information of the interface.
10.2
Routing Table
This page displays the routing information summary generated by different routing protocols.
Choose the menu
Routing
→
Routing Table
→
Routing Table
to load the following page.
Figure 10-4 Routing Table
Routing Information Summary
Protocol
Displays the protocol of the route.
Destination Network:
Displays the destination and subnet of the route.
Next Hop:
Displays the IP address to which the packet should be sent next.
Distance:
Displays the administrative distance which is a rating of the
trustworthiness of a routing information. A higher value means a
lower trust rating. When more than one routing protocols have
routes to the same destination, only the route which has the
smallest distance will be recorded in the IP routing table.
Metric:
Displays the metric of the route.
Interface name:
Displays the description of the egress interface.
167
