The following entries are displayed on this screen:
VLAN Config
VLAN ID:
Enter the VLAN ID to enable IGMP Snooping for the desired
VLAN.
Fast Leave:
Enable or disable Fast Leave feature in this VLAN. If Fast Leave
is enabled, the switch will immediately remove this port from
the multicast group upon receiving IGMP leave messages.
Report
Suppression:
If this function is enabled, the switch will only forward the first
IGMP report message to Layer 3 devices and suppress
subsequent IGMP report messages from the same multicast
group during one query interval, which reduces the number of
IGMP packets.
Member Port Time:
Specify the aging time of the member port. Within this time, if
the switch doesn’t receive IGMP report message from the
member port, it will consider this port is not a member port any
more.
Router Port Time:
Specify the aging time of the router port. Within this time, if the
switch doesn’t receive IGMP query message from the router
port, it will consider this port is not a router port any more.
Max Response
Time:
Enter the host’s maximum response time to general query
messages in a range of 1 to 25 seconds.
Router Ports:
Enter the static router port which is mainly used in the network
with stable topology.
UNIT:
Select the unit ID of the desired member in the stack.
VLAN Table
Select:
Select the desired VLAN ID for configuration. It is multi-optional.
VLAN ID:
Displays the VLAN ID.
Fast Leave:
Displays the fast leave feature of the VLAN.
Report
Suppression:
Displays the report suppression feature of the VLAN.
Member Port Time:
Displays the member port time of the VLAN.
Router Port Time:
Displays the router port time of the VLAN.
Max Response
Time:
Displays the max response time of the VLAN.
Static Router Ports:
Displays the static router ports of the VLAN.
137
