Entry Description:
Auto Refresh:
Enable/Disable the auto refresh function.
Refresh Rate:
Specify the auto refresh rate.
Local Interface:
Enable/Disable the auto refresh function.
Device Type:
Specify the auto refresh rate.
Application Type:
Application Type indicates the primary function of the
applications defined for the network policy.
Unknown Policy
Flag:
Displays whether the local device will explicitly advertise the
policy required by the device but currently unknown.
VLAN tagged:
Indicates the VLAN type the specified application type is using,
'tagged' or 'untagged'.
Media Policy VLAN
ID:
Displays the application (eg. Voice VLAN) VLAN identifier (VID)
for the port.
Media Policy Layer
2 Priority:
Displays the Layer 2 priority to be used for the specified
application type.
Media Policy DSCP:
Displays the DSCP value to be used to provide Diffserv node
behavior for the specified application type as defined in IETF
RFC 2474.
Power Source:
Displays the power source being utilized by a PSE or PD device.
Power Priority:
Power Priority represents the priority of the PD type device to
the power being supplied by the PSE type device, or the power
priority associated with the PSE type device's port that is
sourcing the power via MDI.
Available Power
Value:
Indicates the total power in watts required by a PD device from a
PSE device, or the total power a PSE device is capable of
sourcing over a maximum length cable based on its current
configuration.
400
