TP-Link T3700G-28TQ, User Manual

Page: 264 / 430


Network Diagram

Configuration Procedure

Configure Switch A
Steps Operation Note
1 Configure the
interface and
its IP address.
On page Routing → Interface → Interface Config , create the
interface VLAN2, and configure its IP address as 192.168.1.1 and
Subnet Mask as 255.255.255.0.
2 Add port to the
interface.
On page VLAN → 802.1Q VLAN → VLAN Config , add the port
connected to the client to interface VLAN 2.
3 Create the
VRRP group
On page Routing → VRRP → Basic Config , create a VRRP group with
the VRID as 1, the interface as VLAN 2 and the Virtual IP as
192.168.1.10.
4 Configure
VRRP priority
On page Routing → VRRP → Advanced Config , configure the VRRP
priority of interface VLAN 2 as 110.

Configure Switch B
Steps Operation Note
1 Configure the
interface and
its IP address.
On page Routing → Interface → Interface Config , create the
interface VLAN2, and configure its IP address as 192.168.1.2 and
Subnet Mask as 255.255.255.0.
2 Add port to the
interface.
On page VLAN → 802.1Q VLAN → VLAN Config , add the port
connected to the client to interface VLAN 2.
3 Create the
VRRP group
On page Routing → VRRP → Basic Config , create a VRRP group with
the VRID as 1, the interface as VLAN 2 and the Virtual IP as
192.168.1.10.
Return to CONTENTS
253